No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
€ 7,02 – € 35,10 inkl. MwSt
Includes 20% MwSt.
plus shipping
Delivery Time: immediately available (7-14 days)
Additional duties, taxes and fees may apply for deliveries to non-EU countries.
Outer sleeve
- 10 %
€ 7,02 – € 35,10 inkl. MwSt
Includes 20% MwSt.
plus shipping
Delivery Time: immediately available (7-14 days)
Additional duties, taxes and fees may apply for deliveries to non-EU countries.
- Heating & cooling at the same time
- Suitable for any wall, floor and ceiling
- Suitable for any heat and energy source
- Setup with dry system & wet system possible
- No minimum or maximum build height
- No sweating, no mold, no freezing, no drafts, no dust swirling up
- Easy do-it-yourself installation thanks to egger installation tutorials
- Environmentally friendly – 100% recyclable material
Payment methods:
Bank transfer:
For delivery or self collection
The outer sleeve, there is to know
The outdoor sleeve is used as part of the egger system for surface heating or surface cooling:
The outer socket has an inner diameter of 16 mm, this corresponds to the outer diameter of the 16 mm pipe. Both are joined with a socket welder and the egger welding attachment 16 mm with a plastic weld.
For supply and return lines from the heating circuit manifold to the heating circuit, the pipe routing is often above the standard length of 16-gauge pipe. With the outer sleeve you can connect individual 16 pipes in a straight line and thus achieve your required length. Since the 16 mm pipe is integrated into the outer sleeve, there is no reduction in the flow cross-section (12 mm). This offers the advantage that less resistance is built up and the egger system requires even less energy in operation.
To make the flow as low resistance as possible for a straight extension, we recommend the following prioritization:
| Priority | Resistance | Advantage | Disadvantage |
| 1. outer sleeve | low | Resistance low | min. Mounting height 24 mm |
| 2. double nipple | increases | min. Structure height 20 mm | Increases the resistance |
The outer sleeve is made of PP-R. This is a high-quality material from the group of polyolefin thermoplastics. This material is 100% recyclable and is even used in the food industry.
Thanks to its high strength and resistance to internal pressure and high temperatures, it is used mainly in drinking water and heating installations. In addition, the fabric can be easily processed into fittings or pipes. The individual parts can be joined together by plastic welding.
The color of the outer sleeve is called “natural”. This makes the plastic slightly “transparent”, thanks to the lack of dye there is no interference during welding.
You can use any commercially available socket welder for this purpose. However, the egger welding attachments are required. The matching egger welding attachments can also be ordered or borrowed in the complete plastic welding set for assembly.
According to the manufacturer, the outer sleeve has heat resistance up to 96 degrees. However, this varies depending on the system pressure. However, for tempering you need a maximum of 25-30 degrees of warm water.
The density or DIN value of the material is DIN 4726/8077/8078. In the laboratory, a service life of 150 years was calculated under extreme continuous load (10 bar and 60 °C). That’s why when you buy the egger system, you also get a 20-year warranty.
Underfloor heating
Wall heating
Ceiling heating
The egger system is not only for home heating and cooling: they can be used for office space, as hall heating, workshop heating or even greenhouse heating.
A great advantage of egger registers: they are suitable for any heat source (gas, oil, solar, district heating, photovoltaic, …) and any surface (tile, PVC, laminate, parquet, wood, …).
The outer sleeve as part of the egger system
In order to mount and connect the registers as a heating and cooling system, you need these egger accessories:
- egger register
- Outer angle (connecting part 90°)
- Internal angle double nipple (connecting part 90°)
- Inner angle nipple socket (connecting part 90°)
- Outer socket (connecting part straight)
- Double nipple (connecting part straight)
- Plug (closure part)
- 16 pipe (connecting pipe)
- Holding rail (48 cm) or holding clamp (8 cm)
- Plastic welding set
- Own pipe shear
- Item type: plastic fitting for water-carrying floor heating system
- Area of application: heating and cooling
- Dimensions:
Inner diameter: 16 mm
Outer diameter: 22 mm
- Material: PP/R (“Polypropylene/Random” – is a high-quality, 100% recyclable material from the group of polyolefin thermoplastics)
- Weight: 4.9 g / piece, 245.0 g / package
- Maximum temperature: according to the manufacturer up to 96 degrees – but depends on the system pressure; for heating and cooling a temperature of 25-30 degrees is sufficient.
- Color: Natural (no dye – no interference with welding, slightly transparent).
- Density/DIN value: DIN 4726/8077/8078
- Shelf life: 150 years (depending on temperature and pressure)
- Oxygen diffusion open: To prevent corrosion damage, use corrosion-resistant pipes in the heating system.
- Heat source: Suitable for all commercially available heat and energy sources (e.g. oil, gas, wood, solar, electricity, electric, district heating, etc.).
- Flooring: Suitable for all common floor coverings (parquet, wood, stone, tile, laminate, cork, vinyl, carpet, etc.).
- Substrate: mountable on all common substrates (concrete, wood, brick, insulation, etc.)
- Installation height: at least 24 mm (screed, leveling compound, plaster, drywall, etc.)
- What can flow through: “Normal heating water” (neutral PH value)
- Suitable for rooms: all rooms (living area, bathroom, bedroom, basement, garage, workshop, hall, gym, production hall, etc.).
Depending on your needs, you can get packaging units with 50 pieces of outer sleeves each.
How many outer sleeves do you need?
Each project is different and has its own dimensions. How many outer sleeves you need depends largely on your circumstances. Based on experience, we recommend you to plan 1 piece of external sleeve per planned heating circuit. The egger team will be happy to help you find the right amount:
Frequently asked questions about the egger system
You still have questions about the egger system? Here you will find answers to our customers' most pressing questions: Frequently asked questions
Related products:
You may also like…
-
- 10 %
egger register
€ 25,92 – € 83,16 inkl. MwSt
Includes 20% MwSt.plus shippingDelivery Time: immediately available (7-14 days)Additional duties, taxes and fees may apply for deliveries to non-EU countries.View product -
- 10 %
Outside angle
€ 7,56 – € 37,80 inkl. MwSt
Includes 20% MwSt.plus shippingDelivery Time: immediately available (7-14 days)Additional duties, taxes and fees may apply for deliveries to non-EU countries.View product -
- 10 %
Double nipple
€ 3,02 – € 45,36 inkl. MwSt
Includes 20% MwSt.plus shippingDelivery Time: immediately available (7-14 days)Additional duties, taxes and fees may apply for deliveries to non-EU countries.View product
Assembly instructions
What customers say about the egger system:
During the core renovation of our very old house with 120 m² living space, a low construction height was a critical point. With the egger system, this bottleneck could be successfully solved thanks to only 2 cm of structure.
At first I respected installing the registers myself, but with egger's training and planning I succeeded very well. They were installed in all rooms on the floor and exterior walls. The necessary energy is supplied by solar panels and a heat pump, so it can be cooled pleasantly even in summer.
We now live the 2nd winter in the house and even my wife has never been cold. She always notes that we have a comfortable temperature, but you can't tell where it's coming from!
My not exactly everyday project of a mobile and habitable container, also had very special requirements. I work professionally with heat pumps, the perfect energy source for my mobile home, as they can heat and cool.
Now all that was missing was the right system to distribute the energy provided in the best possible way in the container. The functionality of the egger system convinced me and the 20-year warranty gave me the necessary security.
Mounting egger registers raises some essential questions at the beginning. How many registers can be connected together? How long can lines be? With the provided instructions, this was quickly cleared up and the system installed.
Now all that was missing was the right system to distribute the energy provided in the best possible way in the container. The functionality of the egger system convinced me and the 20-year warranty gave me the necessary security.
Mounting egger registers raises some essential questions at the beginning. How many registers can be connected together? How long can lines be? With the provided instructions, this was quickly cleared up and the system installed.
When remodeling my apartment, the task was to find a comfortable heating solution. Egger Wohlfühlklima I had even discovered years ago and specifically earmarked because I could install the system myself.
During installation, the correct arrangement of the heating circuits and the use of welding equipment posed a particular challenge. In this regard, I would like to thank you again for the super tutorial!
During installation, the correct arrangement of the heating circuits and the use of welding equipment posed a particular challenge. In this regard, I would like to thank you again for the super tutorial!
We needed a bit of practice when welding the egger registers - after all, no master has fallen from the sky yet. We got the hang of it pretty quickly. My tip: Ideally, there should be two of you when welding!
In our house we have installed the registers almost exclusively as wall heating. At least one exterior wall and, depending on the use of the room, other wall surfaces. The registers were then plastered with clay plaster, an ideal combination! In the bathroom we have additionally laid egger registers in the floor, who likes cold tiles after showering.
In our house we have installed the registers almost exclusively as wall heating. At least one exterior wall and, depending on the use of the room, other wall surfaces. The registers were then plastered with clay plaster, an ideal combination! In the bathroom we have additionally laid egger registers in the floor, who likes cold tiles after showering.
As a doctor, I immediately recognized the crucial difference between conventional heating and the egger feel-good climate and implemented it in my private home (renovation). The comfort and well-being experience is fascinating and definitely an essential part of our health. I am extremely satisfied with it.
In our new building, we invested (slightly skeptically) in two innovations: a new type of experience gastronomy on the farm and the egger feel-good climate. Both have been enthusiastically received by our customers and we ourselves are very surprised and fascinated by the benefits of the feel-good climate, especially the extremely fast response time and the very low heating water temperature.
After a short explanation by Christian Egger, it was immediately clear to us that we should equip our new yoga center (600 m2) with egger feel-good climate. Due to the fact that our customers are in thermal balance with the yoga room, the body can fully concentrate on yoga and thus achieve the best possible success (regeneration, store vital energy ...). Our customers are totally fascinated by the climate in the yoga center and enjoy it.
I found egger Wohlfühlklima online. After several weeks of intensive internet research, I have come to the conclusion that both product and support offer the best solution for me!
The two most important points for my decision were the energy required and how complex the installation is.
In my 160 m² house I only need a 9 kW heat pump and thanks to the support provided the installation was very feasible. So both points fully met!
The two most important points for my decision were the energy required and how complex the installation is.
In my 160 m² house I only need a 9 kW heat pump and thanks to the support provided the installation was very feasible. So both points fully met!
