No Results Found
The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.
Workshop heating from egger: Energy-saving heating and cooling at high speed
Heating a workshop seems impossible. Most of them are medium to large halls with high ceilings. Again and again gates and doors have to be opened. In winter cold air flows in, in summer the heat. As a result, you and your team are either way too cold or way too hot.
The egger system revolutionizes the climate in your workshop. It tempers your floor, your wall, your ceiling. Via radiation it then gives off heat to the room or refreshes with pleasant coolness. This means that you and your employees can work in ideal climatic conditions at all times.
Since egger workshop heating does not heat or cool the air but the surfaces surrounding you, it is also independent of open doors or gates. Your customers and employees can get in or out at any time. The heat is delivered via radiation to even the most remote corners independently of the air.
The egger system has two decisive advantages over conventional workshop heating systems, which usually function by distributing warm air:
The system is significantly more energy efficient.
Since there is no dust and other substances swirling through the air due to the lack of air circulation, it is much healthier.
In summary, with egger you can heat or cool your workshop cheaper, more environmentally friendly and above all healthier. The revolutionary technology also creates a comfortable working environment and the “fast as light switch on”.
How does egger workshop heating work in detail?
Surface temperature control is the name of the system behind the egger feel-good climate. In the process, we heat (or cool) the floor, wall and/or ceiling. What areas we temper depends on several factors: Your wishes, existing elements of the room (windows, columns, etc.), necessary functions that need to be maintained or created (sliding doors, partitions, etc.).
When planning your egger heating and cooling system, we will help you from the first sketch to the installation.
The way it works is quickly explained: heated floors, walls or ceilings give off heat to your surroundings via radiation. When they are cooled, they extract heat from your environment. With the right setting, we create a comfortable climate for you, in which you feel the temperature is perfect.
The principle is similar to the heat radiation of the sun. Since no gas (=air) is heated or cooled during surface temperature control, the system also functions independently of air exchange (e.g.: open gate, etc.). It stays warm or cold – depending on what you want at the moment.
egger floor heating or cooling for industry & commerce
The egger system can be installed in any type of floor. There are no load limits for the system itself. If your hall requires a concrete floor, the egger temperature control system is incorporated directly into the concrete to withstand all the stresses that the floor itself can withstand. The egger system is even used in aircraft hangars.
egger wall heating or cooling for industry & commerce
With the same system that we install in the floor, we can also temper your wall surfaces. Visually, these shoring systems are invisible. We adapt to your circumstances (windows, columns, shelves, etc.). egger wall heating can be installed in the plaster or as drywall. The walls are still available for pictures, shelves, etc. There is no restriction.
egger ceiling heating or cooling for industry & commerce
Our system works equally well for tempering ceilings. Especially in industry & commerce, this can have a particularly good effect on the indoor climate in halls. Whereas with ordinary radiators and hall heaters the warm air accumulates at the top, our ceiling heaters for workshops also emit heat or refreshing coolness downwards via radiation.
Your advantages for workshop heating and cooling with egger
Work fast & unrestrained
The system grips within minutes and delivers heat or cool freshness. Once up to temperature, it cannot be slowed down even by open gates, etc. Your employees can work undisturbed at any time.
Low acquisition & energy costs
The egger system costs no more than installing conventional heating systems. However, it works much more effectively and saves energy.
Healthy and emission-free
For many people, dust or air conditioning systems represent an unpleasant health burden. The egger system does not stir up dust when heating and prevents unpleasant dry "air conditioning air" when cooling.
Space saving & invisible
Since our system is installed directly into the floor, wall and ceiling, it requires hardly any space and is practically invisible. You and your employees will only feel it beneficial and be able to work in it liberated.
Frequently asked questions about egger workshop heating
It is very expensive to heat our workshop. How do you manage to reduce energy costs?
We rely on panel heating with a parallel system instead of a serial system. This means: The advantage over conventional radiators or fan heaters is already in the fact that our egger system does not depend on the movement of warm or cold air. Because this is a very poor conductor of heat or cold. In addition, air can hardly store and radiate the temperature.
Compared to other surface temperature control systems (such as conventional underfloor heating), egger has the advantage of parallel water flow. While classic underfloor heating systems require a supply temperature of 35-45 degrees and more, the parallel egger pipes manage with 25-30 degrees. Heat generation thus requires much less energy.
We operate heavy equipment in our workshop. Can the egger system withstand this floor load?
Yes, definitely! If you involve us in the planning of your hall, we can have the system laid directly into the floor material (e.g.: concrete). Our heating or cooling system will then withstand the same load as your entire floor. Even aircraft hangars have already been equipped with the egger floor heating system
This sounds technically very complicated. Is it high maintenance?
No. With the egger system, we have succeeded in incorporating an almost maintenance-free system into the surfaces. Therefore, we even give a 20-year warranty on our elements that we process in your hall in the floor, wall or ceiling. Maintenance work is only necessary on your heat generation (heat pump, boiler, etc.) – not on the egger system.