Ceiling heating and cooling from egger

Ceiling heating systems belong to the group of surface heating systems. The heat (or cooling) emitted is based on the principle of thermal radiation and is therefore perceived as particularly pleasant.

Contrary to the misconception that heat could only spread upwards, temperature control via the ceiling works very well. While it is true that warm air rises, the sensation of comfortable warmth or cooling is all about radiant heat.

It is also this radiant heat that provides a pleasant indoor climate. It is the reason why ceiling heaters are so popular. Although very good results can be achieved with the tempering of the ceiling area alone, the perfect indoor climate can be achieved primarily through the combination of floor, wall and ceiling heating.

egger System: Perfect space utilization and low energy costs

Ceiling heating with the egger system, unlike conventional ceiling heating, represents the next generation of panel heating.

Thanks to a parallel instead of serial line system, material can be saved and conserved, and energy costs can be reduced by a further 10 percent. Because the distance between the pipes shrinks to only 8 cm thanks to the parallel technology, the perfect use of space of the ceiling heating takes place.

And best of all: Neither the energy consumption nor the acquisition costs are any higher than with conventional systems. On the contrary, as already mentioned, energy consumption is up to 10 percent lower.

For more information on energy efficiency, we have compared the heating systems.

More details about how the egger system works can be found in the menu item the egger system.

Contact us!

egger system vs. conventional ceiling heating

*Calculations/disclosures based on market prices incl. 20% VAT in Austria (as of March 2017)

Contact us!

For which applications is egger ceiling heating suitable?

• New construction
• Redevelopment
• Gentle redevelopment
• Refurbishment despite monument protection
• Bathroom renovation
• Basement renovation (especially cold rooms)
• As a substitute for underfloor heating, for particularly valuable floors (as they are not to be removed or reconsidered).
• Particularly suitable for high old building spaces

How is the egger ceiling heating system installed?

The egger ceiling system can be installed in wet construction (plaster or directly inserted into ceiling formwork), in dry construction (with battens) or in suspended ceilings. The type of installation chosen for your premises depends primarily on the conditions on site and/or on your wishes.

Build up wet or direct:

• Ideal construction: Registers are inserted or plastered directly
• no mechanical pressure on plaster, as no pipe bending is required
• any type of plaster is possible (gypsum, lime, cement, clay, loam), because there is no thermal stress
• any type of plaster is possible (gypsum, lime, cement, clay, loam), because there is no thermal stress
• even “uneven” ceilings are easily possible

Structure dry:

• Structure has a thickness of about 3-4 cm. egger registers are mounted on ceiling with counter-battening (18 mm thickness) and covered with wood paneling, gypsum board or gypsum fiberboard
• No mechanical pressure on dry-build elements, as no pipe bending is required
• No thermal pressure for dry-build elements, as flow and return temperatures are almost identical

Structure suspended:

• Registers are implemented in classic ceilings suspended
• no additional space necessary
• no mechanical pressure on ceiling, as no pipe bending is necessary
• No thermal pressure for ceiling, since flow and return temperature are almost identical

For whom is the ceiling heating suitable?

“Homebuilder”/Homeowner/Home Remodeler: Are you building or renovating your own home? You want to create a feel-good climate in your own home? Want to finally get a handle on a “problem room”? Then you’ve come to the right place!

Apartment owners: The egger system is compatible with all common boilers and heating systems. Also with the facilities of large residential buildings. Call us and we will also advise you on site in your home.

Hotels/Gastronomy/Offices: The egger system also turns your guest rooms or work spaces into feel-good climate zones. Gastronomy & hotel industry can thus offer guests significantly more comfort, employers can promote the productivity of their employees with a pleasant indoor climate.

Industry & Commerce: egger solutions also work in large production halls, warehouses, etc. From a large aircraft hangar to a workshop or sensitive greenhouse – no other system offers as much control over the indoor climate.

Contact us!

Reference: Peter Schennach says enthusiastically: “Finally mold-free!”

For 17 years, Peter Schennach has stationed his company site "Glas Peter" in Innsbruck. Together with his team of five, they work both in the offices and in the hall. Several years ago, mold slowly developed in the 500 m² building. This presented the entrepreneur with...

Reference: Italian hotel with egger feel-good climate!

In the homonymous capital of the province of Lucca, located in the heart of Tuscany, a small hotel is currently being built. The property, which is more than 200 years old, is being completely renovated. The special feature is that the frescoes (wall paintings), which...

Reference: Holiday apartments and own home with the egger system!

The builder from Seefeld i. Tirol does not do things by halves in this case. He not only equips his own apartment with the egger system, but also two other vacation homes. Currently, the completion of the entire building is still in full swing and we are part of it!...

Reference: Company annex with wood, clay and egger

In Hartberg in Styria, HHH Holz & Bau GesmbH has decided to expand. The cultivation is special and sustainable mainly due to the combination of materials and products used: Wood Clay & the egger system. This means that nothing will stand in the way of healthy...

Reference: Josef Hoppichler says: “Thanks to egger Wohlfühl-Klima I can offer my guests the best climate.”

In 2012, farmer Josef Hoppichler, known to many as the "Tuxerbauer", completed his extension to the farm store. Since then, guests can celebrate events and dine well there at the same time in an experience gastronomy. Actually, the topic "heating" would have been a...

Reference: How Sandro created a feel-good oasis out of his gym!

Sandro is the owner of the EMS micro studio "Bodystreet" in Innsbruck. His members come to him at the gym because they want to experience efficient personal training - and with little time commitment. The training technology electromuscular stimulation (short: EMS)...

Reference: Memminger detached house – heating and passive cooling!

The egger team made its way to Memmingen, Germany, to integrate the egger system into a 300 m² single-family home. On the construction site you can see how the first floor ceiling is being built and the egger registers have already been placed on it. Thus, in the...

Reference: Car dealership in Hungary is completely “eggerized”!

In Hungary, a complete car dealership is equipped with the egger system. In the future, a pleasant feel-good climate will be noticeable for employees and customers on more than 1000 m². Not only the floor, but also the walls are equipped with egger registers. In the...

Reference: egger panel heating with clay plaster

Daniel Huber's apartment is located in Maurach on the beautiful Achensee in Tyrol. He is a master painter and has been working with clay plaster for quite some time. Clay plaster is, in principle, a clay plaster without "contamination". The main component of clay...

Reference: An old barn becomes an attractive apartment house!

In Ergoldsbach in Lower Bavaria, an old barn was completely renovated. The building, which has long since fallen into disrepair, will be refurbished to create a number of small rental apartments. It is planned that the project will be completed before the end of...