Underfloor heating set 50 m² – with tools

egger-preisvorteil
egger-energiekosten-sparen
egger-heizen-kuehlen-in-einem

 2.819,40 inkl. MwSt

Includes 20% MwSt.
Delivery Time: immediately available (7-14 days)
Additional duties, taxes and fees may apply for deliveries to non-EU countries.

  • Easy do-it-yourself installation with assembly instructions and videos
  • Suitable for floor construction heights from 20 mm
  • Can be combined with any floor covering
  • Suitable for any heat and energy source
  • Setup with dry system & wet system possible
  • 8 cm pipe spacing for uniform surface temperature
  • Responsive heating & cooling in one system
  • More energy efficient than classic underfloor heating and radiators
Payment methods:
Bank transfer:
For delivery or self collection

What you should know about the underfloor heating set 50 m² – with tools

 

The underfloor heating set 50 m² – with tools creates a real feel-good climate in your rooms. The parallel water flow of egger registers depends conventional floor heating (serial heating hose) in operating costs and uniform heat distribution. The homogeneous surface temperature without hot-cold effect, allows you to save on the supply temperature and energy costs. The assembly instructions, assembly videos and planning of our experts, will allow you a safer and more efficient self-installation.

Advantages of the egger system:

  • Unbeatable feel-good climate: Our mode of action is scientifically confirmed and can be understood with common sense. Humans feel most comfortable when environmental surfaces have a comfort temperature. We take care of it!
  • Heating & cooling in one: Our egger system is not only suitable for heating a room. You’ll also save on air conditioning. Because the technology that warms your surfaces in winter is also suitable to cool them in summer.
  • Very low energy costs: Compared to heating with radiators and to classic underfloor heating, you save valuable energy costs.
  • Can be installed on any floor, wall or ceiling: In drywall, in plaster, directly in the concrete layer or on curved surfaces – the egger system is so versatile that it fits in everywhere.
  • “Quick as turning on the light”: Eternal waiting until it is pleasant again (e.g. after vacation), has an end. The egger system creates a comfortable temperature in a short time.
  • Invisible solution: radiators have never been good for the aesthetics of a room. The ugly, white metal containers disappear forever from your 4 walls thanks to egger.

The underfloor heating set 50 m² – basic contains egger registers and pipes covering a heating surface of 50 m², in addition, supply and return pipes with compression fittings for connection to the heating circuit manifold are included. In consultation with our experts, you will receive egger registers in the appropriate size and quantity.

Not included in the floor heating set 50 m² – with tools are control technology and fastening materials. If you already have the appropriate tool(plastic welding set), you can alternatively order the floor heating set 50 m² – basic.

The egger system has self-installation sets for
Floor heating
, Wall heating and
Ceiling heating
. They are available in sizes from 3 m² to 50 m² and with or without tools. In order to combine several egger self-installation sets, we recommend that you contact us. Comprehensive planning can save material and therefore money!

Yes, I would like to have my personal self-installation set configured.

 

Assembly of the set

 

For self-installation, you get all the necessary tools at hand to make the assembly safe and easy. We support you with:

  • Personal planning for your spaces
  • Assembly instruction
  • Assembly videos
  • Telephone support

You’d rather have the system installed? No problem, we will be happy to find you an egger partner who will install on site. Contact us directly.

 

In the egger system, the components are joined together with a plastic weld. Unlike push-fit or press connections, welding unites the system parts – permanently and tightly.

For plastic welding, you need a standard socket welder and welding attachments with 10 mm, 12 mm and 16 mm. For cutting of system parts we recommend to use a pipe cutter, thanks to the point cut straight cut surfaces are created without crushing. The plastic welding set is already included in the floor heating set 50 m² – with tools.

 

egger floor heating

 

The egger register is made of polypropylene (PP-R). This is a high-quality material from the group of polyolefin thermoplastics. This material is 100% recyclable and is even used in the food industry.

Thanks to its high strength and resistance to internal pressure and high temperatures, it is used mainly in drinking water and heating installations. In addition, the fabric can be ideally processed into pipes or fittings.

The individual parts can be joined together by plastic welding. The plastic is slightly “transparent”, thanks to the lack of dye there is no interference with welding.

According to the manufacturer, the plastic registers have a heat resistance of up to 96 degrees. However, this varies depending on the system pressure. However, for tempering you need a maximum of 25-30 degrees of warm water.

The density or DIN value of the material is DIN 4726/8077/8078. In the laboratory, a service life of 150 years was calculated under extreme continuous load (10 bar and 60 °C). That’s why when you buy the egger system, you also get a 20-year warranty.

egger-warm-and-cool-register-with-and-without-fixing-rail-symbol-picture1
egger-warm-and-cool-register-with-and-without-fixing-rail-symbol-picture2
egger-warm-and-cool-register-with-and-without-fixing-rail-symbol-picture3

Underfloor heating & cooling

Wall heating & cooling

Ceiling Heating & Cooling

The egger system is not only intended for heating and cooling at home: it can be used for offices, as a hall heater, workshop heater or even greenhouse heater.

A great advantage of egger registers: they are suitable for any heat source (gas, oil, solar, district heating, photovoltaic,…) and any surface (tile, PVC, laminate, parquet, wood, …).

The egger system

The egger accessories are available so that you can mount and connect the registers as a heating and cooling system:

Technical details

  • Item type: register/plastic pipes for water-bearing underfloor heating system
  • Area of application: heating and cooling
  • Dimensions egger register:
    Width: 56 cm
    Length: 60 cm to 300 cm
    Collecting pipe (pipe top and bottom): 16×2 mm pipe wall thickness
    Intermediate tubes 10x 1.5 mm
    Pipe spacing 8 cm
  • Material: PP/R (“Polypropylene/Random” – is a high-quality, 100% recyclable material from the group of polyolefin thermoplastics)
  • Maximum temperature: according to the manufacturer up to 96 degrees – but depends on the system pressure; for heating and cooling a temperature of 25-30 degrees is sufficient.
  • Color: Natural (no dye-no interference with welding, slightly transparent).
  • Complies with DIN: 4726/8077/8078
  • Shelf life: 150 years (depending on temperature and pressure)
  • Heat source: Suitable for all commercially available heat and energy sources (e.g. oil, gas, wood, solar, electricity, electric, district heating, etc.).
  • Flooring: Suitable for all common floor coverings (parquet, wood, stone, tile, laminate, cork, vinyl, carpet, etc.).
  • Substrate: mountable on all common substrates (concrete, wood, brick, insulation, etc.)
  • What can flow through: “Normal heating water” (neutral PH value)
  • Surface height: min. 20 mm (screed, leveling compound, plaster, drywall, etc.)
  • Suitable for rooms: all rooms (living area, bathroom, bedroom, basement, garage, workshop, hall, gym, production hall, etc.).
  • Oxygen diffusion open: To prevent corrosion damage, use corrosion-resistant pipes in the heating system.

Scope of delivery

The floor heating set 50 m² – with tool consists of:

Note: In the floor heating set 50 m² – with tools is not included heating control or mounting hardware.

Request desired configuration

 

You have questions or customization requests for the self-installation set?
Of course, not every home is the same! We will be happy to put together a self-installation set tailored to your needs. Just click on the button, send your request and get advice from our egger experts.

egger consulting

Frequently asked questions about the egger system

You still have questions about the egger system? Here you will find answers to our customers' most pressing questions: Frequently asked questions

Related products:

You may also like…

Assembly instructions

No Results Found

The page you requested could not be found. Try refining your search, or use the navigation above to locate the post.

What customers say about the egger system:

During the core renovation of our very old house with 120 m² living space, a low construction height was a critical point. With the egger system, this bottleneck could be successfully solved thanks to only 2 cm of structure.
At first I respected installing the registers myself, but with egger's training and planning I succeeded very well. They were installed in all rooms on the floor and exterior walls. The necessary energy is supplied by solar panels and a heat pump, so it can be cooled pleasantly even in summer.
We now live the 2nd winter in the house and even my wife has never been cold. She always notes that we have a comfortable temperature, but you can't tell where it's coming from!

Eßletzbicher Peter

My not exactly everyday project of a mobile and habitable container, also had very special requirements. I work professionally with heat pumps, the perfect energy source for my mobile home, as they can heat and cool.
Now all that was missing was the right system to distribute the energy provided in the best possible way in the container. The functionality of the egger system convinced me and the 20-year warranty gave me the necessary security.
Mounting egger registers raises some essential questions at the beginning. How many registers can be connected together? How long can lines be? With the provided instructions, this was quickly cleared up and the system installed.
Huber Mathias

When remodeling my apartment, the task was to find a comfortable heating solution. Egger Wohlfühlklima I had even discovered years ago and specifically earmarked because I could install the system myself.
During installation, the correct arrangement of the heating circuits and the use of welding equipment posed a particular challenge. In this regard, I would like to thank you again for the super tutorial!
Oitzinger Hanspeter

We needed a bit of practice when welding the egger registers - after all, no master has fallen from the sky yet. We got the hang of it pretty quickly. My tip: Ideally, there should be two of you when welding!
In our house we have installed the registers almost exclusively as wall heating. At least one exterior wall and, depending on the use of the room, other wall surfaces. The registers were then plastered with clay plaster, an ideal combination! In the bathroom we have additionally laid egger registers in the floor, who likes cold tiles after showering.
Steiner Norbert

As a doctor, I immediately recognized the crucial difference between conventional heating and the egger feel-good climate and implemented it in my private home (renovation). The comfort and well-being experience is fascinating and definitely an essential part of our health. I am extremely satisfied with it.

Dr. Peter Gritsch

Practice for naturopathy, Gnadenwald in Tirol

In our new building, we invested (slightly skeptically) in two innovations: a new type of experience gastronomy on the farm and the egger feel-good climate. Both have been enthusiastically received by our customers and we ourselves are very surprised and fascinated by the benefits of the feel-good climate, especially the extremely fast response time and the very low heating water temperature.

Josef Hoppichler

Farm store & gastronomy, Tulfes in Tyrol

After a short explanation by Christian Egger, it was immediately clear to us that we should equip our new yoga center (600 m2) with egger feel-good climate. Due to the fact that our customers are in thermal balance with the yoga room, the body can fully concentrate on yoga and thus achieve the best possible success (regeneration, store vital energy ...). Our customers are totally fascinated by the climate in the yoga center and enjoy it.

Erika and Josef Aschauer

Yoga center, Straußdorf in Bavaria

I found egger Wohlfühlklima online. After several weeks of intensive internet research, I have come to the conclusion that both product and support offer the best solution for me!
The two most important points for my decision were the energy required and how complex the installation is.
In my 160 m² house I only need a 9 kW heat pump and thanks to the support provided the installation was very feasible. So both points fully met!
Widmer Willi